Steam Network Operation Assurance
Apply dynamic simulation to mitigate the impact of spurious upsets, which could affect the operability of your steam and electrical network.
Real-Time Optimization opportunities in NGL recovery plants
APC has been applied broadly in NGL recovery plants, but there are still some millions left on the table that can be captured by RTO applications, since optima do not sit on corners.
The Benefits of Digitals Twins and VR for greenfield projects
Co-presentation of Inprocess and CEPSA of the successful project implementing Digital Twins and VR at CEPSA Puentemayorga plant (Spain).
La Transformación Digital de la Formación de los Operadores de la Industria Química
Presentación en el Agora de Smart Chemistry Smart Future, área de Expoquimia específicamente destinada a los avances tecnológicos para el sector químico. Inprocess lleva años ayudando a la Industria Química en la transformación digital de la formación de sus operadores.
Beyond Guesswork
During a flare release, the temperature of the flare network has a strong dependence on the relief source and on ambient conditions. During a relief of hot gases, contraction of the gases could occur due to the cool-down to ambient conditions. The rate of contraction velocity is accelerated if cooling leads to condensation of the contained gas components.
Advanced Tools for ITER Tritium Plant System Modeling & Design
Chemical plant system modeling experience based on the use of largely validated commercial modeling tools such as the Aspen HYSYS is adapted and exploited to develop numeric routines for unitary isotopic operations, including permeation, cold trapping, reversible absorption, and cryogenic distillation, for the ITER tritium plant systems.
Sustain Operation Excellence by Upgrading OTS for FCC Unit
Joint oral contribution to Aspentech’s Users Conference Optimize 2019 held in Houston, TX (USA) in May 2020.
INGENO: Inprocess Generic Operator Training Simulators
Generic Operator Training Simulators are extremely powerful training tools for acquiring the generic knowledge required by students and plant operators to understand the way complex producing units are operated from the plant control room consoles.
Modelado de Entorno de Pruebas para el Estudio y Simulación de Monitorización de Fallas en Procesos de Tritio
Mención: Mejor póster Reunión SNE 2020. Los métodos para la monitorización de tritio previstos en ITER consisten en detener periódicamente su operación para medir de la cantidad global de tritio en planta.
Dynamic Simulation Tools for Isotopic Separation System Modelling and Design
Cryogenic distillation is a key process for tritium processing in fusion: it is necessary for isotopic separation but is prone to hold high tritium inventories.
