A new technical paper has been published by Inprocess personnel!
Don’t miss this interesting article where our experts explore the use of dynamic simulation to find the optimal control parameters for purge gas injection in flares. The paper has been published in the October 2020 issue of Hydrocarbon
During a flare release, the temperature of the flare network has a strong dependence on the relief source and on ambient conditions. During a relief of hot gases, contraction of the gases could occur due to the cool-down to ambient conditions. The rate of contraction velocity is accelerated if cooling leads to condensation of the contained gas components.
Inprocess would like to invite you to the webinar entitled: “Flare Systems Revalidation: From PSVs to Dynamic Flare Networks”
Chemical plant system modeling experience based on the use of largely validated commercial modeling tools such as the Aspen HYSYS is adapted and exploited to develop numeric routines for unitary isotopic operations, including permeation, cold trapping, reversible absorption, and cryogenic distillation, for the ITER tritium plant systems.
Starting next June 15th, with an Introduction to Dynamic Process Simulation course, Inprocess experts will be using Virtual Classrooms to give online a selected list of our process simulation-based courses.
MODEC, Inc. has awarded Inprocess the development of the Lifecycle Operator Training Simulator (LC-OTS) for their Almirante Barroso (MV32) Floating Production Storage and Offloading (FPSO) platform,
As detailed in our previous week’s post, #ITOP is not only an innovative training solution to improve the know-how of plant operators concerning the functioning of plant equipment, but also a tool that can be easily configured to be accessed from the #cloud. Whether installed in a public or private cloud,
Joint oral contribution to Aspentech’s Users Conference Optimize 2019 held in Houston, TX (USA) in May 2020.
Thanks to ITOP (Inprocess Training for OPerators), we have been able to tackle one of the most critical concerns in the process industry,
By using dynamic multi-phase pipeline simulation results, Inprocess engineers can determine static hydraulic effects and operating envelopes in pipelines and the transient behavior of them during upset conditions (ramp up, ramp down, pigging operations, etc.)
Inprocess Technology and Consulting Group, S.L.
Pedro i Pons, 9-11, 13th floor
08034 Barcelona, Spain
Tel: +34 933 308 205
© 2025 Inprocess Technology and Consulting Group, S.L. | All rights reserved
© 2025 Inprocess Technology and
Consulting Group, S.L.
All rights reserved