Lifecylce OTS, Using Simulation Models from Engineering Design to Plant Operations
Deep train your workforce before plant start-up and reduce future operational issues using dynamic process simulation all along asset lifecycle.
Deep train your workforce before plant start-up and reduce future operational issues using dynamic process simulation all along asset lifecycle.
Applying dynamic simulation during the design phase of gas turbine systems in order to minimize the occurrence of operating trips.
Apply dynamic simulation to mitigate the impact of spurious upsets, which could affect the operability of your steam and electrical network.
APC has been applied broadly in NGL recovery plants, but there are still some millions left on the table that can be captured by RTO applications, since optima do not sit on corners.
During a flare release, the temperature of the flare network has a strong dependence on the relief source and on ambient conditions. During a relief of hot gases, contraction of the gases could occur due to the cool-down to ambient conditions. The rate of contraction velocity is accelerated if cooling leads to condensation of the contained gas components.
Chemical plant system modeling experience based on the use of largely validated commercial modeling tools such as the Aspen HYSYS is adapted and exploited to develop numeric routines for unitary isotopic operations, including permeation, cold trapping, reversible absorption, and cryogenic distillation, for the ITER tritium plant systems.
Mención: Mejor póster Reunión SNE 2020. Los métodos para la monitorización de tritio previstos en ITER consisten en detener periódicamente su operación para medir de la cantidad global de tritio en planta.
Cryogenic distillation is a key process for tritium processing in fusion: it is necessary for isotopic separation but is prone to hold high tritium inventories.
Confirming FPSO process design/sizing, Control Narrative and ESD design is adequate and safe for all loads, transients and trips. Providing early Operator Training and refining your Operating Procedures before the ICSS is implemented. Detecting Bad Actors and process anomalies with online process Digital Twins.
Inprocess oral contribution to Honeywell’s EMEA Users Conference held in Amsterdam (The Netherlands), in October 2019.